Slaggyford Stones 1
Image by StoneGloves

Yes, our explanation for the placename Glendue is that there were Scottish miners working there. There's some Flemish placenames not far away that are more positively attributed - with mining leases. But mention of Glendue Burn led me to a geologists report, from the 1980s, which I hadn't read before. They cite two more copper workings in the Knar valley and name the feature that bears the ore as the Faugh Cleugh Fault. It's good to have stuff written down as we know the seam of ore by another name.

If your figure of 2.14 for the elevation of the horizon, from the larger stone row at Thornhope, is in degrees then you have a 100% error in your workings out. It's actually about twice that figure - say a touch less than five degrees. It's because of the copper workings that these monuments were constructed. Of course the archaeologists will only believe there's copper if the source is referenced in a scientific document. A local history book is not good enough. If I hadn't been looking for the placename of Glendue then I wouldn't have found the DTI commissioned survey. One step at a time !

StoneGloves wrote:
If your figure of 2.14 for the elevation of the horizon, from the larger stone row at Thornhope, is in degrees then you have a 100% error in your workings out.
The altitude from the stones to Glendue Fell is as I said give or take 0.4 degrees . Maybe you don't understand how to calculate altitudes , you have yet to even use the term and may be getting it mixed up with elevation .This was one your recent questions ,"How do you calculate the elevation, incidentally. Trigonometry or a computer programme? " .The elevation is found on as accurate as possible OS maps ,is measured in metres not degrees and not calculated .

As usual this will probably take a while , despite it being very straightforward then you will realise and then go off on another tack .